9-Pin Dot Matrix Printers Epson FX-2190IIN

Epson FX-2190IIN Dot Matrix Printer

EXPERIENCE RUGGED RELIABILITY AND POWERFUL PERFORMANCE.

Discover a new way to print all business documents with Epson’s FX-2190IIN dot matrix printers. Designed to deliver absolute performance and reliability, these powerful printers offer blazing print speeds of up to 615cps and an MTBF (Mean Time Before Failure) of up to 25,000 POH (Power On Hours). With the built-in network connectivity* function, printing efficiently is achieved in the most convenient way.

      • 9-pin wide carriage
      • Speed: up to 615cps 
      • Prints up to 6-part forms
      • 25,000 power on hours MTBF
      • USB 2.0, Bi-directional Parallel Supported

       

Where to Buy
Unparalleled Productivity
Boost productivity with fast print speeds of up to 615 cps (10 cpi) and 128 kb memory buffer.

Rugged Reliability
Enjoy cost savings, superior print quality and minimal downtime with a MTBF of up to 25,000 POH.

Superior Connectivity
Stay connected and experience fuss-free printing with built-in network connectivity via Ethernet cable.

Printing Technology:


Control Panel: 6 switches and 10 LEDsPrint Direction: Bi-direction with logic seekingPrinting Method: Impact dot matrixNumber of Pins in Head: 9 pinsControl Code: ESC/P2, IBM PPDS

Reliability:


Printhead Life: 400 million strokes / wireMean Print Volume Between Failure (MVBF): 52 million lines (except print head)Mean Time Between Failure (MTBF): 25,000 Power On Hours (POH) (25% Duty)

Print Characteristics:


Bitmap Fonts: Epson Draft: 10, 12, 15 cpiScalable Fonts: Epson Roman / Epson Sans SerifBarcode: EAN-13, EAN-8, Interleaved 2 of 5, UPC-A, UPC-E, Code 39, Code 128, POSTNET

Paper Media:


Cut Sheet (Single Sheet): Length: 100 - 420 mm | (3.9 - 16.5”)
Width: 100 - 420 mm | (3.9 - 16.5”)
Thickness: 0.065 - 0.14 mm | (0.0025 - 0.0055”)
Entry: Front
Entry: Rear
Length: 100 - 420 mm | (3.9 - 16.5”)
Width: 100 - 420 mm | (3.9 - 16.5”)
Thickness: 0.065 - 0.14 mm | (0.0025 - 0.0055”)Cut Sheet (Multi-part Sheet): Entry: Front
Length: 100 - 420 mm | (3.9 - 16.5”)
Width: 100 - 420 mm | (3.9 - 16.5”)
Thickness: 0.12 - 0.46 mm | (0.0047 - 0.018”)
Entry: Rear
Length: 100 - 420 mm | (3.9 - 16.5”)
Width: 100 - 420 mm | (3.9 - 16.5”)
Thickness: 0.12 - 0.46 mm | (0.0047 - 0.018”)Continuous Paper (Single Sheet / Multi-part): Entry: Front / Rear / Bottom
Copies:
Original + 4 copies
Length: 101.6 - 558.8 mm | (4.0 - 22.0”)
Width: 101.6 - 406.4 mm | (4.0 - 16.0”)
Thickness: 0.065 - 0.46 mm | (0.0025 - 0.018”)Envelope (No.6): Entry: Rear
Length: 92 mm | (3.6”)
Width: 165 mm | (6.5”)
Thickness: 0.16 - 0.52 mm | (0.0063 - 0.0205”)Envelope (No.10): Entry: Rear
Length: 105 mm | (4.1”)
Width: 241 mm | (9.5”)
Thickness: 0.16 - 0.52 mm | (0.0063 - 0.0205”)Label (Base Sheet): Entry: Buttom
Length: 101.6 - 558.8 mm | (4.0 - 22.0”)
Width: 101.6 - 406.4 mm | (4.0 - 16.0”)
Thickness: 0.16 - 0.19 mm | (0.0063 - 0.0075”)Card: Entry: Front / Rear
Length: 100 - 148 mm | (3.9 - 5.8”)
Width: 100 - 148 mm | (3.9 - 5.8”)
Thickness: 0.22 mm | (0.0087”)Roll Paper: Entry: Rear
Diameter: 127mm | (5”)
Width: 216 mm | (8.5”)
Thickness: 0.07 - 0.09 mm | (0.0028 - 0.035”)Line Spacing: 4.23mm (1/6”) or programmable in increments of 0.059mm (1/432”)

General:


Operating Systems: Printer Driver: Microsoft Windows XP / Vista / 7 / 8 / 10

Utility
Epson Status Monitor 3: Microsoft Windows XP / Vista / 7 / 8 / 10
Epson Setting Utility: Microsoft Windows XP / Vista / 7 / 8 / 10

Consumables:


Ribbon Cartridge Black: Standard: Fabric Ribbon Cartridge (Black)
Ribbon Life: Approx. 12 million Characters*1

Environmental Conditions (Operating):


Temperature: 5 - 35 °C*2Humidty: 10 - 80% RH*2

Acoustic Noise:


Acoustic Noise: 55 dB

Input Data Buffer:


Input Data Buffer: 128KB

Interface:


Interface: USB 2.0, Bi-directional parallel (IEEE-1284 nibble mode supported) Serial, 100base-Tx wired LAN

Printable Columns:


Pitch: 10cpi: 136 cpl

Notes:

*1 Actual print yield may vary depending on usage purpose and environment.

*2 Without condensation.